Vancouver, September 27th 2017, Wolf Wiese CEO of Golden Dawn Minerals Inc., (TSX-V: GOM; FRANKFURT: 3G8A) (the “Company” or “Golden Dawn”) provides the following update on activities at the Greenwood Precious Metals Project.

Lexington Mine

Yesterday the Company has given the required 72 hours’ notice to the BC Ministry of Environment that mobilization of equipment and crews are nearing readiness to commence dewatering the Lexington mine. The Company currently has a mine contractor on site and is working with its environmental consultant to carry out this project according to required conditions. The primary dewatering program is estimated to take approximately four weeks, with discharge at up to 1,000 cubic meters per day, and will be followed by continual dewatering at up to 35 cubic meters per day. The mine is accessed from two declines, which will be rehabilitated as the mine is de-watered. 

Golden Dawn Minerals Lexington Mine

Golden Dawn Minerals Lexington Mine

Once the mine is pumped out, permanent mine services, including mine electrical and ventilation can be installed to facilitate underground mine operations.  Initial work will consist of mapping and sampling of the workings and definition drilling to validate the resources and support a test mine program design.  Test mining would provide mill feed for the Greenwood Process Plant. 

Exploration Program

 Exploration drilling continued in late August at the Golden Crown property, which hosts the Company’s processing plant and tailings facility. Drilling is currently underway to verify, infill and extend the known mineral resources on the property. Fifteen holes have been completed to date. This work is being undertaken in anticipation of permitting the Golden Crown mine in the second half of 2018. Also during this season, the Company’s geological personnel have been prospecting numerous historic mine sites and mineral showings, in order to delineate further drill targets with a view to increase mill feed tonnage over the ensuing years. All historic mines and active mines are within a 15-km radius of the Company’s mill.

A limited surface diamond drilling program was completed at the May Mac mine after the successful and extensive underground drill program completed in late spring of this year. A total of

Golden Dawn Minerals May Mac Mine Section

Golden Dawn Minerals May Mac Mine Section

1,886 metres were drilled in 8 holes from surface. The holes tested the northwest strike continuation of the Skomac vein system, with mineralized quartz veins intersected in 7 of 8 holes, and disseminated copper mineralization intersected in the overlying rock unit. Significant assay results were obtained in hole BF17-03, which intersected 1.13 g/t gold, 23.0 g/t silver and 0.7% lead over 0.36 meters between 204.34 and 204.7 meters depth. Previously unknown copper mineralization was intersected in hole BF17-08 between 45.0 and 45.79 metres (0.79m), which contained 0.24% copper.

The drilling results indicate the vein system extends significantly beyond the mine workings to at least 215m to the northwest from the termination of the level 7 drift.  Further drilling is warranted to test the structure for mineralized shoots.  Due to the topography of the area, the vein system is covered by an increasing thickness of cover rocks along the northwest strike extension. This results in increased costs and difficulty in targeting the veins at depth. As such, the Company will conduct follow-up drilling from underground. A permit application for extension of the 7 level of the mine and underground diamond drilling has been submitted to request approval for this program to proceed. The Company has concluded that focus on extracting mill feed from the Lexington mine and processing in our facility are of highest priority.

Mill Reactivation

The Company has received cost estimates to restart the Company’s Mill, and the consensus from contractors is that the facility is in excellent shape, and refurbishment will cost approximately $270,000 and take 3 to 5 weeks to be operable. It is anticipated that work will commence to restart the mill post-dewatering of the Lexington Mine to coincide with anticipated mill feed from the Lexington Mine.

Golden Dawn Minerals Greenwood Mill

Golden Dawn Minerals Greenwood Mill

Drilling samples reported above were collected under the supervision of Dr. Mathew Ball, P.Geo. and delivered to Bureau Veritas Minerals laboratory in Vancouver, B.C. Bureau Veritas is an independent commercial laboratory that is ISO 9001 certified. Analyses for gold were by the fire assay method using 30 gram samples with an ICP-ES finish. Duplicate gold analyses were performed on samples containing abundant visible sulphide mineralization. Silver and other elements were analyzed by ICP-ES using a near total, four acid digestion. Quality control was monitored using reference and blank samples inserted into the sample sequence at intervals. Check analyses are being performed on selected samples.

Technical disclosure in this news release has been approved by Dr. Mathew Ball, P.Geo., a Qualified Person as defined by National Instrument 43-101, and Chief Operating Officer of the Company.

 

On behalf of the Board of Directors,

GOLDEN DAWN MINERALS INC.

Wolf Wiese, President & Chief Executive Officer

For further information, please contact:

Corporate Communications

604-221-8936

allinfo@goldendawnminerals.com

Renmark Financial Communications Inc.
Barry Mire: bmire@renmarkfinancial.com

Tel.: (416) 644-2020 or (514) 939-3989
www.renmarkfinancial.com

 

 

This press release was prepared by management who take full responsibility for its content. Neither the TSX Venture Exchange nor its regulation services provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release. This document contains certain forward looking statements which involve known and unknown risks, delays, and uncertainties not under the Company’s control which may cause actual results, performance or achievements of the Company to be materially different from the results, performance, or achievements implied by these forward looking statements. We seek safe harbor.